View USB-COM422_8010478.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

future technology devices international ltd (ftdi) unit 1, 2 seaward place, centurion business park, glasgow, g41 1hh, united kingdom tel.: +44 (0) 141 429 2777 fax: + 44 (0) 141 429 2758 e - mail (support): support1@ftdichip.com web: http://www.ftdichip.com neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. this product and its documentat ion are supplied on an as - is basis and no warranty as to their suitability for any pa rticular purpose is either made or implied. future technology devices international ltd will not accept any claim for damages howsoever arising as a result of use or failure of this produ ct. your statutory rights are not affected. this product or any varia nt of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. this document provides preliminar y information that may be subject to change without notice. no freedom to use patents or other intellectual property rights is implied by the publication of this document. future technology devices international ltd, unit1, 2 seaward place, centurion business park, glasgow, g41 1hh, united kingdom. scotland registered number: sc136640 copyright ? 2010 future technology devices international limited future technology devices international ltd usb - com 42 2 - plus 2 datasheet document reference no.: ft_0001 3 5 ver sion 1.2 issue date: 201 1 - 0 5 - 06
copyright ? 2010 future technology devices international limited 1 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 1 introduction 1.1 functional description the usb - com422 - plus 2 is a usb to a dual interface rs422 level serial uart adaptor incorporating ftdis ft 2 232 h hi - speed usb 2.0 (480mb/s) to dual seri al uart interface ic device. the ft2232h handles all the usb signaling and protocols. the adaptor provides a fast, simple way to connect devices with a n rs422 interface to usb. usb - com 422 - plus 2 is a usb to a d ual - port rs 42 2 adapter. the integrate d electronics of the usb - com 42 2 - plus 2 utilise the ftdi ft 2 232 h and include s rs 42 2 level shifters plus txd/rxd leds to provide a visual indication of data traffic through the module . figure 1 . 1 usb - com 42 2 - p lus 2 the module uses a standard usb - b device connector for connection to an upstream host or hub port. rs 42 2 - level signals, including modem handshake signals, are available on an industry - standard de - 9p connector. the maximum rs 42 2 - level data rate is 10 mbps. the usb - com 42 2 - plus 2 module requires usb device drivers, available free from www.ftdichip.com , which are used to make the usb - com 42 2 - plus 2 appear as a virtual com port (vcp). this allows existing serial commun ications software, such as hyperterminal, to exchange data through the usb - com 42 2 - plus 2 to a legacy rs 42 2 peripheral device.
copyright ? 2010 future technology devices international limited 2 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 1.2 led description the usb - com 42 2 - plus 2 uses five leds to indicate a valid link as well as data traffic according to the following t able: led colour function description yellow x 1 power on when usb - com - plus is configured and ready red x 2 txd activity flashes when data is transmitted from the usb - com 42 2 - plus 2 to the attached rs 42 2 device green x 2 rxd activity flashes when data is transmitted from the attached rs 42 2 device to the usb - com 42 2 - plus 2 table 1 . 1 C led description 1.3 block diagram figure 1 . 2 usb - com 4 2 2 - plus 2 block diagram 1.3.1 block description usb b client connector this connector provides the interface for connection to a usb host or hub port. the maximum cable length is 5 meters, according to the usb 2.0 specification. ftdi ft 2 232 h ft 2 232 h hi - speed us b 2.0 (480mb/s ) is a dual seri al uart interface ic device. operating system device drivers are required in order to work with the one to provide the virtual com port serial functionality. dual rs 42 2 level shifter the rs 42 2 level shifter converts the signal s provided by the ft 2 232 h into the voltage levels required by rs 42 2 devices. dual de - 9p connector (male) the de - 9p connector is configured in an industry standard (tia/eia - 574) pin - out to provide connection to rs 42 2 peripherals through standard cables. se e section 3.1.2 f t d i f t 2 2 3 2 h h i - s p e e d u s b s e r i a l b r i d g e r s 4 2 2 l e v e l s h i f t e r u s b b c l i e n t c o n n e c t o r d e - 9 p c o n n e c t o r r s 4 2 2 l e v e l s h i f t e r d e - 9 p c o n n e c t o r c h a n n e l a c h a n n e l b
copyright ? 2010 future technology devices international limited 3 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 1.4 features adds dual rs - 42 2 serial port by connecting to a usb 2.0 hi - speed interface. easy plug & play installation and rs - 42 2 device connection works with usb 1.1 & 2.0 host and hub ports industry standard ft di chip set & device drivers for maximum compatibility microsoft windows ? whql - certified, mac os x, linux and windows ce device drivers installs as a standard windows com port com port number can be changed to any available com port number, to support hy perterminal, or any other serial communications software application running in windows supports windows server 2008, 2003, vista, xp , 2000, windows ce, linux, mac os x fifo: 4k byte transmit buffer, 4k byte receive buffer rs - 42 2 data signals: txd + , txd - , rxd + , rxd - , rts + , rts - , cts + , cts - , gnd powered by usb port. no external power adapter required. serial port speed up to 10 mbps serial communication parameters o parity: none, even, odd o data bits: 7, 8 o flow control: rts/cts , x - on/x - off, none two de - 9p male connector leds indicate usb enumeration, rxd, txd for monitoring port status & easy diagnostics operating temperature of - 40c to +85c 1.5 performance figures parameter performance usb interface 480 mbps usb 2.0 high - speed rs 42 2 interface standa rd windows baud rates (300bps to 921.6k bps) custom baud rates (300bps to 10 mbps) through baud rate aliasing. see ftdi application note: configuring ft232r, ft2232 and ft232bm bau d rates m ax c able l ength us b =5m, rs422=12m (for 10mbps) table 1 . 2 - performance figures part number description usb - com 42 2 - plus 2 usb - com - plus hi - speed usb to dual - port rs 42 2 module table 1 . 3 - ordering information
copyright ? 2010 future technology devices international limited 4 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 1 introduction ................................ ................................ ................... 1 1.1 functional description ................................ ................................ .................. 1 1.2 led description ................................ ................................ ............................. 2 1.3 block diagram ................................ ................................ ............................... 2 1.3.1 block description ................................ ................................ ....................... 2 1.4 features ................................ ................................ ................................ ........ 3 1.5 performance figures ................................ ................................ ..................... 3 2 installation ................................ ................................ ..................... 6 2.1 example applications and configurations ................................ ..................... 6 2.1.1 wiring ................................ ................................ ................................ ...... 6 2.2 device driver installation ................................ ................................ ............. 7 2.2.1 microsoft windows ................................ ................................ ..................... 7 2.2.2 mac os x, linux, windows ce ................................ ................................ ... 12 3 connections ................................ ................................ .................. 13 3.1 external connectors ................................ ................................ .................... 13 3.1.1 usb ................................ ................................ ................................ ....... 13 3.1.2 rs 42 2 ................................ ................................ ................................ .... 13 4 electrical details ................................ ................................ ........... 14 4.1 usb ................................ ................................ ................................ ............. 14 4.2 rs 42 2 ................................ ................................ ................................ ......... 14 5 mechanical details ................................ ................................ ........ 15 5.1 module mechanical dimensions ................................ ................................ ... 15 6 physical environment details ................................ ....................... 16 6.1 storage ................................ ................................ ................................ ....... 16 6.2 operating ................................ ................................ ................................ .... 16 7 enviro nmental approvals & declarations ................................ ...... 17 7.1 emi compatibility ................................ ................................ ........................ 17 7.2 safety ................................ ................................ ................................ .......... 17 7.3 environmental ................................ ................................ ............................. 17 7.4 reliability ................................ ................................ ................................ .... 17 7.4.1 mttf ................................ ................................ ................................ ..... 17 7.5 import / export information ................................ ................................ ....... 18 8 troubleshooting ................................ ................................ ........... 19 8.1 hardware ................................ ................................ ................................ .... 19 8.2 device driver ................................ ................................ .............................. 19 9 contact information ................................ ................................ ..... 20
copyright ? 2010 future technology devices international limited 5 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 10 appendix a - list of figures and tables ................................ ......... 22 appendix b - revision history ................................ ............................ 23
copyright ? 2010 future technology devices international limited 6 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 2 installation 2.1 example applications and configurations 2.1.1 wiring insert the a - plug into an available usb host or hub port. insert the mini - b - plug into the us b mini - b - receptacle on the usb - com422 - plus2 . the usb - com 42 2 - plus 2 follows eia - 422 standard as a data terminal equipment (dte) device. if the rs 42 2 equipment being connected is a data communication equipment (dce) device, its typical that a straight - throu gh cable can be used. dte pin number signal name e xpected c onnect signal 1 txd - = transmit data , negative polarity rxd - 2 txd + = transmit data , positive polarity rxd+ 3 rxd + = receive data , positive polarity txd+ 4 rxd - = receive data , negative pola rity txd - 5 gnd = signal ground gnd 6 rts - = request to send , negative polarity cts - 7 rts + = request to send , positive polarity cts+ 8 cts + = clear to send , positive polarity rts+ 9 cts - = clear to send , negative polarity rts - table 2 . 1 C rs 42 2 dte to dce connection with straight - through cable some serial devices may require certain handshake signals to be connected. refer to your device manual for cabling details.
copyright ? 2010 future technology devices international limited 7 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 2.2 device driver installation the usb - com 42 2 - p lus2 module drivers are available for download from: www.ftdichip.com 2.2.1 microsoft windows with the device drivers being windows hardware quality labs (whql) certified, they are also available through download directly from the microsoft ? windows ? up date service. this is the best choice when connecting the usb - com 42 2 - p lus2 to a computer running windows vista. additional i nstallation options are noted below: installation executable shown on windows xp 1) login to your system as administrator, or a user with administrator rights. 2) prior to connecting the usb - com 42 2 - p lus2 to the usb host or hub port, download the latest device driver version from the ftdichip web site. 3) run this executable to install the device drivers. 4) connect the usb - com422 - plus2 to your computer. a notification will appear near the task bar indicating that new hardware has been installed and is ready for use. it is normal if this notice appears twice. figure 2 . 1 - hardware ready windows update shown on windows xp you must have an active internet connection and the windows update service enabled. 1) connect the usb - com422 - plus2 to your usb host or hub. 2) the found new hardware wizard will appear. the first dialog should ask whether it is a cceptable to use the windows update service to find the device driver. figure 2 . 2 C found new hardware wizard 3) select one of the yes choices and click next. 4) the following screen appears:
copyright ? 2010 future technology devices international limited 8 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 figure 2 . 3 C automatic install 5) wait while the driver is found, downloaded, and installed. this step may take a couple minutes. 6) after the files are found and installed, click finish to complete the installation. figure 2 . 4 - complete hardware installation 7) steps 2 through 6 will repeat. the first time installs the basic usb serial converter in the usb device tree. the second time installs the virtual com port layer in the ports tree and assigns the com port number. 8) when both portions of the device driver have been installed successfully, the following message will appear, indicating that the device is ready.
copyright ? 2010 future technology devices international limited 9 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 figure 2 . 5 - hardware ready com port assignment next, to determine which com port has been assigned, open the windows device manager from the system control panel. figure 2 . 6 - device manager click on t he plus + sign next to the ports tree and universal serial bus controllers tree to list the available usb device . you will see two additional usb serial port, followed by a comn assignment. a nd two additional usb serial converter a and usb ser ial converter b .
copyright ? 2010 future technology devices international limited 10 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 figure 2 . 7 - com port and usb device name assignment t o determine which com port has been assigned to converter a or b, the cursor point to the usb serial port (com10) or (com11), th en right - click on it and select properties , it shows their relationship to the converter a or b. in the figure below, the converter a is assigned to com 10, converter b is assigned to com 11. figure 2 . 8 - com port assignment and proterties use this com port number with your application software in order to access the usb - com422 - plus2 . if an application requires use of a different com port number, the assignment may be changed through the advanced driver op tions settings. from the above properties , click on the port settings tab.
copyright ? 2010 future technology devices international limited 11 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 figure 2 . 9 - settings tab
copyright ? 2010 future technology devices international limited 12 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 then click on the advanced button. figure 2 . 10 - advanced options this will display the various advanced settings. note the com port assignment in the upper left. clicking on the drop - down list will display the available port numbers. select one that is not in use and click ok on each dialog b ox to activate the selection. windows will remember this com port number. 2.2.2 mac os x, linux, windows ce device drivers and ftdi installation guides for mac os x, linux and windows ce are available for download on the ftdichip web sites. follow the respect ive ftdi installation guides for the chosen operating system.
copyright ? 2010 future technology devices international limited 13 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 3 connections 3.1 external connectors 3.1.1 usb the usb - com422 - plus2 is a downstream usb 2.0 device. a standard usb mini type b receptacle is mounted inside the usb - f - 1001 to facilitate connection to a n upstream usb host or hub. pin number pin type description 1 power vbus = usb power provided from upstream usb host or hub 2 bidirectional d C = usb data signal, negative polarity 3 bidirectional d+ = usb data signal, positive polarity 4 id no conne cted 5 ground gnd = usb signal ground shield case ground drain = typically connected to the host pc case table 3 . 1 C usb mini type "b" receptacle pin - out 3.1.2 rs 42 2 both rs 42 2 port s are configured as data ter minal equipment (dte), with a 9 - contact d - sub pin connector. pin assignments are according to tia/eia - 422 . both connectors are the same pin - out. pin number pin type description 1 output txd - = transmit data , negative polarity 2 output txd + = transmit data , positive polarity 3 input rxd + = receive data , positive polarity 4 input rxd - = receive data , negative polarity 5 ground gnd = signal ground 6 output rts - = request to send , negative polarity 7 output rts + = request to send , positive polarity 8 input cts + = clear to send , positive polarity 9 input cts - = clear to send , negative polarity table 3 . 2 C de - 9p rs 42 2 pin - out
copyright ? 2010 future technology devices international limited 14 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 4 electrical details 4.1 usb parameter description minimum typical maximum units condi tions usb_vcc input power voltage* 4.25 5.0* 5.25 v *present when usb cable is attached and usb host or hub powered. i cc usb current 30 50 ma table 4 . 1 - usb electrical details 4.2 rs 42 2 parameter descriptio n minimum typical maximum units conditions v trans transmitter output voltage swing 2 v r l = 5 0r c l = 50pf v rec receiver input voltage range - 7 +12 v r l = 5 0r c l = 50pf esd hbm n/a 15 kv for all rs - 42 2 inputs and outputs pin table 4 . 2 C rs 42 2 electrical details
copyright ? 2010 future technology devices international limited 15 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 5 mechanical details 5.1 module mechan ical dimensions dimensions are in mm. the pcb height is dominated by the d - type connectors and is 17mm +/ - 2mm (this includes the tails of the d - type connectors soldered pins). mounting holes are 5mm in diameter. figure 5. 1 - usb - com422 - plus2 pcb dimensions
copyright ? 2010 future technology devices international limited 16 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 6 physical environment details 6.1 storage parameter description minimum typical maximum units conditions t storage temperature range - 65 +150 o c table 6 . 1 - storage tempe rature 6.2 operating parameter description minimum typical maximum units conditions t operating temperature range C 40 +85 o c 5% to 95% rh, non condensing table 6 . 2 - operating temperature
copyright ? 2010 future technology devices international limited 17 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 7 environmental appro vals & declarations 7.1 emi compatibility fcc and ce the usb - com422 - plus2 has been tested to be compliant with both fcc part 15 subpart b and european emc directive. note: this is a class b product. in a domestic environment, this product may cause radio int erference, in which case the user may be required to take adequate measures. note: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. these limits are designed to provid e reasonable protection against harmful interference in a residential installation. this equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to r adio communications. however, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna. increase the separation between the equipment and receiver. connect the equipment into an outlet on a circui t different from that to which the receiver is connected. consult the dealer or an experienced radio/tv technician for help. 7.2 safety the usb - com422 - plus2 is d efine d as limited power supply (lps) device, with operating voltages under 60vdc . 7.3 environmental th e usb - com422 - plus2 is a lead - free device that complies with the following environmental directives: rohs, weee, reach, pfos and decabde. 7.4 reliability the usb - com422 - plus2 is designed as a robust usb - serial module for use in many environments. there are no user - serviceable parts. any failure will require a replacement of the unit. 7.4.1 mttf the mean time to failure is calculated at tbd hours.
copyright ? 2010 future technology devices international limited 18 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 7.5 import / export information import / export information country of origin china harmonized code tbd product desc ription usb to rs 422 development module , single port usa eccn ear99 C no license required table 7 . 1 - import / export information
copyright ? 2010 future technology devices international limited 19 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 8 troubleshooting 8.1 hardware cables are the most common sources of trouble with e xternal devices. check the following: - usb cable is properly inserted at both ends - computer power is on - computer is not in sleep or standby - if a usb hub is used, be sure it is set for self - powered operation - if a usb hub is used, be sure all cables are p roperly inserted - if all the above are ok, the yellow led should be lit, indicating the device has been recognized by the usb subsystem. rs 42 2 cables C check the following: - output signals (txd + , txd - , rts+, rts - ) are connected to the respective inputs (rxd + , rxd - , cts + , cts - ) in each direction. - check for specific handshake requirements of your rs 42 2 peripheral. - if handshake signals are not used, ensure the application is set to no hardware handshake, or equivalent. - test the port with a loop - back connecto r. connect txd + to rxd + , txd - to rxd - , rts + to cts + and rts - to cts - . use a simple terminal program to check that data is transmitted and received. 8.2 device driver ensure the latest device driver is in use. see www.ftdichip.com if other devices with ftdi chips are installed in the system, check with all manufacturers of these devices for the latest device drivers. see the ftdi installation guides for additional details: http://ftdichip.com/doc uments/installguides.htm common windows device driver troubles: device times out : the default settings of the device driver assume typical data transfers of hundreds to thousands or more bytes at a given time. some applications, such as a gps device, on ly send data in short packets, often only a few bytes. if this is the case, it may be necessary to adjust the driver buffer size and/or latency timer to smaller values. these values can be adjusted through the advanced driver options as noted in figure 2 .13. the buffer size can be reduced to 64 bytes. the latency timer can be set as low as 2ms. a setting of 1ms will cause unnecessary usb traffic and could adversely affect data transmission. erratic mouse pointer : the device driver defaults to query an attached device to find out whether it is a mouse or modem, consistent with native com port operation. some rs 42 2 peripherals constantly send short packets of data, causing the host system to think a mouse or modem has been attached. these short packe ts will interfere with normal mouse operation causing the pointer to jump around the screen. if this happens, disconnect the rs 42 2 device and uncheck the serial enumerator option, also found on the advanced driver options screen in figure 2.13. com port i n use : windows keeps track of all com port assignments. if multiple ftdichip products have been connected to a single system, the com port number will increase, even if the other devices are not attached. if the higher com port assignments are not accep table for the application, known unused com port numbers should be uninstalled according to the ftdi installation guide: http://ftdichip.com/documents/installguides.htm .
copyright ? 2010 future technology devices international limited 20 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 9 contact informati on head office C glasgow, uk future technology devices international limited unit 1, 2 seaward place , centurion business park glasgow g41 1hh united kingdom tel: +44 (0) 141 429 2777 fax: +44 (0) 141 429 2758 e - mail (sales) sales1@ftdichip.com e - mail (support) support1@ftdichip.com e - mail (general enquiries) admin1@ftdichip.com web site url http://www.ftdichip.com web shop url http://www.ftdichip.com branch office C taipei, taiwan future technology devices international limited (taiwan) 2 f, no 516 , sec. 1 neihu road neihu district taipei 114 taiwan, r.o.c. tel: +886 ( 0 2 ) 879 7 13 30 fax: +886 (0 2 ) 87 5 1 97 37 e - mail (sales) tw.sales1@ftdichip.com e - mail (support) tw.support1@ftdichip.com e - mail (general enqui ries) tw.admin1@ftdichip.com web site url http://www.ftdichip.com branch office C shanghai, china future technology devices international limited (china) room 408, 317 xianxia road, changning district, shanghai, china tel: +86 (21) 62351596 fax: +86 (21) 62351595 e - mail (sales): cn.sales@ftdichip.com e - mail (support): cn .support@ftdichip .com e - mail (general enquiries): cn. admin1@ftdichip.com web site url: http://www.ftdichip.com branch office C hillsboro, oregon, usa future technology devices interna tional limited (usa) 7235 nw evergreen parkway, suite 600 hillsboro, or 97123 - 5803 usa tel: +1 (503) 547 0988 fax: +1 (503) 547 0987 e - mail (sales) us.sales@ftdichip.com e - mail (support) us.support@ftdichip.com e - mail (general enquiries) us.admin@ftdichip.com web site url http://www.ftdichip.com
copyright ? 2010 future technology devices international limited 21 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 distributor and sales repr esentatives please visit the sales network page of the ftdi web site for the contact details of our distributor(s) and sales representative(s) in your country.
copyright ? 2010 future technology devices international limited 22 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 10 appendix a - list of figures and tables list of figures: figure 1.1 usb - com 42 2 - plus 2 ................................ ................................ ................................ ....................... 1 figure 1.2 usb - com 42 2 - plus 2 block diagram ................................ ................................ .......................... 2 figure 2.1 - hardware ready ................................ ................................ ................................ .......................... 7 figure 2.2 C found new hardware wizard ................................ ................................ ................................ .... 7 figure 2.3 C automatic install ................................ ................................ ................................ ......................... 8 figure 2.4 - complete hardware installation ................................ ................................ ................................ 8 figure 2.5 - hardware ready ................................ ................................ ................................ .......................... 9 figure 2.6 - device manager ................................ ................................ ................................ ........................... 9 figure 2.7 - com port and usb device name assignment ................................ ................................ ....... 10 figure 2.8 - com port assignment and proterties ................................ ................................ ..................... 10 figure 2.9 - settings tab ................................ ................................ ................................ ............................... 11 figure 2.10 - advanced options ................................ ................................ ................................ ................... 12 figure 5.1 - usb - com422 - plus2 pcb di mensions ................................ ................................ .................. 15 list of tables: table 1.1 C led description ................................ ................................ ................................ ........................... 2 table 1.2 - performance figures ................................ ................................ ................................ .................... 3 table 1.3 - ordering information ................................ ................................ ................................ .................... 3 table 2.1 C rs 42 2 dte to dce connection with straight - through cable ................................ ................... 6 table 3.1 C usb mini type "b" receptacle pin - out ................................ ................................ .................... 13 table 3.2 C de - 9p rs 42 2 pin - out ................................ ................................ ................................ ................. 13 table 4.1 - usb electrical details ................................ ................................ ................................ ................. 14 table 4.2 C rs 42 2 electrical details ................................ ................................ ................................ ............ 14 table 6.1 - storage temperature ................................ ................................ ................................ .................. 16 table 6.2 - operating temperature ................................ ................................ ................................ .............. 16 table 7.1 - import / export information ................................ ................................ ................................ ........ 18
copyright ? 2010 future technology devices international limited 23 document reference no.: ft_0001 35 usb - com422 - plus2 datasheet version 1.2 clearance no .: ftdi #103 appendix b - revision history version d raft first draft 06 july 2009 version 1.0 first release 27 august 2009 version 1. 1 edited section 1.3.1, removed the statement a standard a to b cable is provided 12 th april 2010 version 1. 2 added more details to dimensions drawi ng 6 th may 2011

▲Up To Search▲

Price & Availability of USB-COM422

	To Download USB-COM422 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .